Free Shipping + Free Returns
Free Shipping + Free Returns
Skip to content

Explore Scientific 50mm Finder Scope Rings “ Tall

$89.99

Notify me when back in stock

Description

Description

Explore Scientific finderscope rings are all made for 50mm finders. Choose from a classic low profile bracket (about an inch tall), one that is a tad higher (1.5") or a high profile bracket that stands 4" above the finderscope base.

Regardless of the height you choose, these brackets have two rings to hold your finder firmly yet gently, and each ring has three adjustment points. Heavy-duty plastic thumbscrews are included, and have large heads for easy adjustment even if you’re wearing gloves.

Because your telescope may not fit in its case with the finderscope attached, you will appreciate the quick release feature on Explore Scientific finder brackets. The bracket itself dovetails into the finder base (sold separately), and locks down with thumbscrews. It is a simple thing to remove or install your finder and bracket on your telescope in this manner.

To install your finder into the bracket, simply back the thumbscrews out so that you’ve opened up the full inside diameter of the rings. Slide the finder into place, and adjust the screws inward until your finderscope is securely held in position. You should have very rough alignment at this point, which means when you look through the finder and center an object, and then look through a low power eyepiece inserted in your telescope diagonal or focuser, that object will most likely be in the field of view, but not at or near the center (unless you are very lucky!). Doing that first fine alignment…the task of matching what’s in your finder to what’s in your eyepiece…can be tedious and frustrating sometimes, but once you complete the job, it should never be required again. Sure, you will have to tweak the adjustment every time you re-install the finder/bracket combo onto your telescope, but it should be fairly quick and simple.

Here is a helpful hint when it comes time to do that first alignment. Set your telescope up in the daytime, and make sure you bring out a variety of eyepieces with you. Find an easy target that is relatively far away, like a streetlight or the top of a telephone pole. Starting with the lowest power eyepiece, adjust your finder bracket until you have “matching” views. The more accurate you are, the easier it will be when you trade out your low-power eyepiece for something a little stronger.

Now do just that; put in a medium-powered eyepiece and do the same thing, being as accurate as you can. Finally, it’s time for the high-powered eyepiece. Once you have finished this alignment process, you can either wait for the sun to go down to finish tweaking your finder, or you can put your telescope away and wait until the next time. Either way, once it is dark, find something bright, like the Moon or Venus or Jupiter, and center it in your finder. Now install the medium-powered eyepiece and check your view. If the object is not centered, make your adjustments, then insert the high-powered eyepiece and check again. Once you have made the necessary tweaks, you are good to go. From now on, unless you remove the finder from the bracket or something else happens to severely change alignment, you should only have to make small tweaks before every observing session. I know it sounds like a lot of trouble to go through for such a “small” thing, but trust me, I have seen more beginners make the mistake of trying to do finder alignments in the dark on small, dim objects, and it is not a pretty sight! All they want to do is observe, and they feel like they are wasting precious time doing silly things. A well-aligned finder makes astronomy SO much easier…give yourself a break and do the hard part during the day, and you won’t be sorry!

Specs

Item Number FNDRRGSTALL Weight 7oz; 198.4g Length 73mm Width 61mm Height 115mm

Warranty

Limited USA One Year Warranty when product is registered within 60 days of purchase. Click Here to register.

CA Residents: Prop 65 WARNING(S)

Free Shipping

Shipping is FREE on all orders to customers within the United States. We don't want to mess around with fine print and extra charges, we like things to be simple and easy. 

Want to know about our Returns Policy? Read more here.

Order Confirmation:
As soon as you place your order you will receive an order confirmation
e-mail.  This means that we have received your order in our system and
pre-authorized your credit card for the purchase.  

As soon as we receive your order we automatically check to confirm that
your order is in stock and available for immediate shipment.  If your item
is on back-order or unavailable we will void the pre-authorization and
reach out to you via e-mail to see if alternate arrangements can be
made.  

If your item(s) are available for immediate shipment (within 5 business
days) we will process the charges and get to work preparing your
order for shipment.

Order Shipment:
If your order is in stock and we process the charges to your credit card it
will ship within three business days from the date of your order.  
We will send you shipping confirmation within 24 hours of your order
leaving the warehouse to the e-mail address you provided when
checking out.  

If you do not receive shipping confirmation from us within four business
days of your order feel free to follow up with us at info@stargazeroptics.com.

International Orders:
Please be aware that our products are made specifically for the United States market. This means that they require a 110V
electrical system to function correctly. 

Our products have generally not been certified for use with other
countries electrical safety standards but all of our products are certified
to United States standards.

We will happily ship our fantastic products to international customers.
Due to the extremely wide variety of product dimensions we will provide
an up to date shipping price quote for you on request.

If you are happy with our shipping quote we will prepare an order and
payment though our ultra secure online payment gateway.

Damages:
Please inspect the packaging of your item(s) when they arrive, if you
notice any damage you should make note of it when signing for delivery
or do not agree to accept the delivery.

If you do accept delivery you are required to immediately take photos
using your smart phone or camera of the damaged packaging or
products inside the packaging. 

If your item(s) do arrived damaged please send photos to info@stargazeroptics.com, then visit our Returns page and lodge your return claim online.

Free Returns

While we fully stand by every product that we sell, we understand that
sometimes you might change your mind or realize the product you
ordered wasn't exactly what you were hoping for.

That's why we offer a 30 Day Return Policy.

If you decide you want to return an item for any reason within 30 days
after receipt of your order, please email us at info@stargazeroptics.com with your order number and we will provide detailed instructions on how to
process the return.

Return shipping costs will be covered by Stargazer Optics.

Once your return item(s) have been received and inspected at our
warehouse(s), we will send you an email notification that we have
processed your return payment.

*Please note: In order to receive a refund for the item(s) ordered, the
item(s) must arrive back to our distribution center in "Like New" condition
and must contain all original packaging and accessories.

"Like New" means that the items you ordered must not show any visual
signs of wear.  Opened products will be accepted, as long as the above criteria are met.

If items are returned with visual signs of wear, or have any issues due to
use will not be accepted and no refund will be given.

If you decide you want to return your order, please email us at info@stargazeroptics.com with your order number and we will assist you. We want to make this as simple of a process as possible for you.

Damages
If the product is damaged, you must make note of it immediately when
signing for delivery and send photos to info@stargazeroptics.com the day of delivery.

Stargazer Optics will pay for shipping defective, damaged, or
incorrect merchandise at our cost.

Remember to keep all the original packaging for any items that need to
be returned. All returns need to be authorized by our customer service
department prior to being processed. 

We will ensure you get the product you ordered, undamaged, as soon
as possible. Items that become damaged after use are non-refundable
unless specified under warranty.

Cancellations
If you would like to cancel an order, please email or call our customer
service team immediately.

Cancellations received before shipment will receive a full refund.

Orders canceled after items have shipped will follow our 30 Day Return
policy.

Other Return Policy Notes:
If a certain vendor or product does not support the return policy stated
above, this will be noted in the product descriptions or in the product-
specific return information.

Products that are specified as certified pre-owned or used are ineligible
for a return

Stargazer Optics only sells to purchasers who intend to use the
item(s) for the duration of its economic life. Orders purchased for the
specific purpose of a "one time use or temporary use" are not eligible for
return under any circumstances. This includes but is not limited to;
orders intended for use in a trade show or a conference venue, orders
that are purchased by promotional companies, and orders that are
purchased by trade show facilitators.

For more information on Shipping & Returns see our FAQ page.

Description

Description

Explore Scientific finderscope rings are all made for 50mm finders. Choose from a classic low profile bracket (about an inch tall), one that is a tad higher (1.5") or a high profile bracket that stands 4" above the finderscope base.

Regardless of the height you choose, these brackets have two rings to hold your finder firmly yet gently, and each ring has three adjustment points. Heavy-duty plastic thumbscrews are included, and have large heads for easy adjustment even if you’re wearing gloves.

Because your telescope may not fit in its case with the finderscope attached, you will appreciate the quick release feature on Explore Scientific finder brackets. The bracket itself dovetails into the finder base (sold separately), and locks down with thumbscrews. It is a simple thing to remove or install your finder and bracket on your telescope in this manner.

To install your finder into the bracket, simply back the thumbscrews out so that you’ve opened up the full inside diameter of the rings. Slide the finder into place, and adjust the screws inward until your finderscope is securely held in position. You should have very rough alignment at this point, which means when you look through the finder and center an object, and then look through a low power eyepiece inserted in your telescope diagonal or focuser, that object will most likely be in the field of view, but not at or near the center (unless you are very lucky!). Doing that first fine alignment…the task of matching what’s in your finder to what’s in your eyepiece…can be tedious and frustrating sometimes, but once you complete the job, it should never be required again. Sure, you will have to tweak the adjustment every time you re-install the finder/bracket combo onto your telescope, but it should be fairly quick and simple.

Here is a helpful hint when it comes time to do that first alignment. Set your telescope up in the daytime, and make sure you bring out a variety of eyepieces with you. Find an easy target that is relatively far away, like a streetlight or the top of a telephone pole. Starting with the lowest power eyepiece, adjust your finder bracket until you have “matching” views. The more accurate you are, the easier it will be when you trade out your low-power eyepiece for something a little stronger.

Now do just that; put in a medium-powered eyepiece and do the same thing, being as accurate as you can. Finally, it’s time for the high-powered eyepiece. Once you have finished this alignment process, you can either wait for the sun to go down to finish tweaking your finder, or you can put your telescope away and wait until the next time. Either way, once it is dark, find something bright, like the Moon or Venus or Jupiter, and center it in your finder. Now install the medium-powered eyepiece and check your view. If the object is not centered, make your adjustments, then insert the high-powered eyepiece and check again. Once you have made the necessary tweaks, you are good to go. From now on, unless you remove the finder from the bracket or something else happens to severely change alignment, you should only have to make small tweaks before every observing session. I know it sounds like a lot of trouble to go through for such a “small” thing, but trust me, I have seen more beginners make the mistake of trying to do finder alignments in the dark on small, dim objects, and it is not a pretty sight! All they want to do is observe, and they feel like they are wasting precious time doing silly things. A well-aligned finder makes astronomy SO much easier…give yourself a break and do the hard part during the day, and you won’t be sorry!

Specs

Item Number FNDRRGSTALL Weight 7oz; 198.4g Length 73mm Width 61mm Height 115mm

Warranty

Limited USA One Year Warranty when product is registered within 60 days of purchase. Click Here to register.

CA Residents: Prop 65 WARNING(S)

Free Shipping

Shipping is FREE on all orders to customers within the United States. We don't want to mess around with fine print and extra charges, we like things to be simple and easy. 

Want to know about our Returns Policy? Read more here.

Order Confirmation:
As soon as you place your order you will receive an order confirmation
e-mail.  This means that we have received your order in our system and
pre-authorized your credit card for the purchase.  

As soon as we receive your order we automatically check to confirm that
your order is in stock and available for immediate shipment.  If your item
is on back-order or unavailable we will void the pre-authorization and
reach out to you via e-mail to see if alternate arrangements can be
made.  

If your item(s) are available for immediate shipment (within 5 business
days) we will process the charges and get to work preparing your
order for shipment.

Order Shipment:
If your order is in stock and we process the charges to your credit card it
will ship within three business days from the date of your order.  
We will send you shipping confirmation within 24 hours of your order
leaving the warehouse to the e-mail address you provided when
checking out.  

If you do not receive shipping confirmation from us within four business
days of your order feel free to follow up with us at info@stargazeroptics.com.

International Orders:
Please be aware that our products are made specifically for the United States market. This means that they require a 110V
electrical system to function correctly. 

Our products have generally not been certified for use with other
countries electrical safety standards but all of our products are certified
to United States standards.

We will happily ship our fantastic products to international customers.
Due to the extremely wide variety of product dimensions we will provide
an up to date shipping price quote for you on request.

If you are happy with our shipping quote we will prepare an order and
payment though our ultra secure online payment gateway.

Damages:
Please inspect the packaging of your item(s) when they arrive, if you
notice any damage you should make note of it when signing for delivery
or do not agree to accept the delivery.

If you do accept delivery you are required to immediately take photos
using your smart phone or camera of the damaged packaging or
products inside the packaging. 

If your item(s) do arrived damaged please send photos to info@stargazeroptics.com, then visit our Returns page and lodge your return claim online.

Free Returns

While we fully stand by every product that we sell, we understand that
sometimes you might change your mind or realize the product you
ordered wasn't exactly what you were hoping for.

That's why we offer a 30 Day Return Policy.

If you decide you want to return an item for any reason within 30 days
after receipt of your order, please email us at info@stargazeroptics.com with your order number and we will provide detailed instructions on how to
process the return.

Return shipping costs will be covered by Stargazer Optics.

Once your return item(s) have been received and inspected at our
warehouse(s), we will send you an email notification that we have
processed your return payment.

*Please note: In order to receive a refund for the item(s) ordered, the
item(s) must arrive back to our distribution center in "Like New" condition
and must contain all original packaging and accessories.

"Like New" means that the items you ordered must not show any visual
signs of wear.  Opened products will be accepted, as long as the above criteria are met.

If items are returned with visual signs of wear, or have any issues due to
use will not be accepted and no refund will be given.

If you decide you want to return your order, please email us at info@stargazeroptics.com with your order number and we will assist you. We want to make this as simple of a process as possible for you.

Damages
If the product is damaged, you must make note of it immediately when
signing for delivery and send photos to info@stargazeroptics.com the day of delivery.

Stargazer Optics will pay for shipping defective, damaged, or
incorrect merchandise at our cost.

Remember to keep all the original packaging for any items that need to
be returned. All returns need to be authorized by our customer service
department prior to being processed. 

We will ensure you get the product you ordered, undamaged, as soon
as possible. Items that become damaged after use are non-refundable
unless specified under warranty.

Cancellations
If you would like to cancel an order, please email or call our customer
service team immediately.

Cancellations received before shipment will receive a full refund.

Orders canceled after items have shipped will follow our 30 Day Return
policy.

Other Return Policy Notes:
If a certain vendor or product does not support the return policy stated
above, this will be noted in the product descriptions or in the product-
specific return information.

Products that are specified as certified pre-owned or used are ineligible
for a return

Stargazer Optics only sells to purchasers who intend to use the
item(s) for the duration of its economic life. Orders purchased for the
specific purpose of a "one time use or temporary use" are not eligible for
return under any circumstances. This includes but is not limited to;
orders intended for use in a trade show or a conference venue, orders
that are purchased by promotional companies, and orders that are
purchased by trade show facilitators.

For more information on Shipping & Returns see our FAQ page.